Please select material

Can TCS be used for outdoor or wet applications?

Our wall tiles are designed for indoor vertical decoration. They are not recommended for damp areas, or horizontal work counter surfaces.

Are the TCS veneers flexible or stiff? 

The TCS Veneers are very flexible and will confirm to most contoured surfaces and walls. For best results clean dust free flat surfaces are recommended. 

How do you cut TCS veneers?

The TCS veneers can be cut with standard scissors and knives, as well as regular wood working tools. 

How do I install the TCS veneers on the wall?

The installation process is very simple. Each veneer panel has adhesive on its back, allowing it to stick permanently to a wide variety of primed or painted surfaces. On textured walls it is recommended to reinforce the adhesion strength by applying silicon between the tape lines but is not necessary. 

What is the backing of the TCS tiles?

The back is smooth and also semi-water proof and fire rated. 

Can you clean TCS walls?

As our tiles come pre-sealed, the wall can be cleaned with a damp cloth. Do not use heavy cleaners or abrasive pads. 

Do I need special trim pieces for corners?

No, the TCS veneer is very thin once installed additional corner trim pieces are not required. 

Do I need special trim pieces for corners?

No, the TCS veneer is very thin once installed additional corner trim pieces are not required.

How long will it take to put up a wall? 

We recommend an average time of 2-3 minutes per piece. 

If my wall has surface variation, will the joints be even? 

Yes. The TCS is very flexible and will conform to most surfaces. 

Can I put it over brick or stucco? 

No. We recommend putting a flat substrate over the brick, tile or stucco such as drywall or MDF.